CardSharing.Ws Forum - Powered by vBulletin



Results 1 to 5 of 5

Thread: help! mgcamd 1.35 config for cline

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    4
    Post Thanks / Like
    Rep Power
    0

    Default help! mgcamd 1.35 config for cline

    Hey! I have an amiko alien 2 triple tuner with e2 hyperion 3 openpli. Now i have a cline and not working with mgcamd 1.35. I not know config the file mg_cfg e newcamd.list. I insert the line in cccamd.list.
    post my file for yours help:

    mg_cfg

    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }


    # ky update (sum 01 or 02 with 04)
    # 01 update only new kys, default setting
    # 02 update all kys (used for valid PMK checking)
    # 04 enable TPS au
    U: { 05 }


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/kys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 09 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 04 } 01 05


    # network ecm timeout in seconds
    K: { 30 }


    # newcamd dead routes connect retry, sec
    Q: { 30 }


    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 02 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 }


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm kys update
    # + web port to use for osd
    S: { 00 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 02 }


    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 00 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 00 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.ky on channel change
    # 04 reread SoftCam.ky if file changed
    R: { 07 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { ff }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 11 }

    and newcamd.list

    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000
    CWS = 127.0.0.1 10000 pkt0 pkt0 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    CWS = 127.0.0.1 10001 pkt1 pkt1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    CWS = 127.0.0.1 10002 pkt2 pkt2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    thank you



  2. #2
    Super Moderator nerminz's Avatar
    Join Date
    May 2008
    Posts
    3,141
    Post Thanks / Like
    Rep Power
    14

    Default

    If you have C line, then:

    G: { 32 }

    and

    cccamd.list

    C: yuorpeerhost 12222 user pass
    Last edited by nerminz; 04-02-2014 at 21:34.
    You are not required to read the forum rules but you must to respect them !


  3. #3
    VIP Member
    Join Date
    Mar 2008
    Location
    CARD SHARING SYSTEMS
    Posts
    115
    Post Thanks / Like
    Rep Power
    9

    Default

    Dont work,because C line working mgcamd 1,38test and report hereregards
    ZON TV CABO 30W
    DIGITAL+ ASTRA19,2E & HISPASAT 30W
    Tring Tv 16 E English Premier Leauge
    Digitalb 16 E Full HD

    ein Sport Channel
    Nilesat & Atlantic Bird 4A @ 7 West

    Openbox,Skybox,Stmbox,Dreambox,Yumatu,Next,Baff,Co olstream,clarke-tech



  4. #4
    Super Moderator nerminz's Avatar
    Join Date
    May 2008
    Posts
    3,141
    Post Thanks / Like
    Rep Power
    14

    Default

    Quote Originally Posted by BIGMAN_58 View Post
    Dont work,because C line working mgcamd 1,38test and report hereregards

    Must have working!

    In the mg_cfg edit "G" line
    G: { 32 }

    and paste C line in the
    cccamd.list

    C: yuorpeerhost 12222 user pass

    restart MGCAMD

    If not work, mabe problem is Amico Alien or "
    B: { 11 }"
    Last edited by nerminz; 05-02-2014 at 07:36.
    You are not required to read the forum rules but you must to respect them !


  5. #5
    VIP Member
    Join Date
    Mar 2008
    Location
    CARD SHARING SYSTEMS
    Posts
    115
    Post Thanks / Like
    Rep Power
    9

    Thumbs up

    Quote Originally Posted by nerminz View Post
    Must have working!

    In the mg_cfg edit "G" line
    G: { 32 }

    and paste C line in the
    cccamd.list

    C: yuorpeerhost 12222 user pass

    restart MGCAMD

    If not work, mabe problem is Amico Alien or "
    B: { 11 }"


    Please work it and send me mgcamd.log
    ZON TV CABO 30W
    DIGITAL+ ASTRA19,2E & HISPASAT 30W
    Tring Tv 16 E English Premier Leauge
    Digitalb 16 E Full HD

    ein Sport Channel
    Nilesat & Atlantic Bird 4A @ 7 West

    Openbox,Skybox,Stmbox,Dreambox,Yumatu,Next,Baff,Co olstream,clarke-tech



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

TopSat.Org TOPlist