Msy Hammer
05-02-2011, 08:50
Clarke-Tech ET9000 HD (Enigma 2)
http://digitalt.tv/wp-content/gallery/cache/690__585x133_clarke-tech-et-9000_front.jpg
Produkteigenschaften
Broadcom Mips Prozessor
Open Source Linux E2 Operation System
Media Player
Plugin support (JPEG, MP3, XviD ...)
2 interne Kartenleser
2 CI Slots
MPEG2 / MPEG4 H264 Kompatibel
DVB-S2 Twin Tuner mit Loop Through
VF display 12 Digit DOT Matrix
128 MB NAND Flash / 512 MB DDR Memory
External SATA supported
1 x (3,5” Halterung ) interner SATA HDD Anschluss (Festplatte nicht enthalten)
Netzwerk Ethernet Interrface 10/100MB
3x USB 2.0 Anschluss (1x Front /2x Rückseite)
Fernbedienung 4 in 1 (STB,TV,DVD,AUX)
HDMI
Y Pb Pr Komponent
Composite Video (RGB)
2x Scart
Digital Audio SPDIF (optisch)
EPG
Automatischer&Manueller Suchlauf
Sender wechsel < 1 Sekunde
Multiple LNB control (DiSEqC)
Videotext / Teletext
Unterstützung E2 Bouquet und Senderliste
http://digitalt.tv/wp-content/gallery/cache/689__500x105_clarke-tech-et-9000_back.jpg
http://digitalt.tv/wp-content/gallery/cache/692__556x126_et9000remote.png
Technische Daten
Allgemein
Maße (B X H X T) 380 X 60 X 240 (mm)
Gewicht (Net) ca. 3 kg
Betriebstemperatur 0°C ~ +45°C
Farbe Schwarz
LNB Steuerung
Polarization 14/18V [max. 400 mA]
22KHz Ton
DiSEqC 1.0 / 1.1 / 1.2 / USALS
System
NAND Flash 128MB
DDR Memory 512MB
Prozessor Broadcom MIPS Bcm 7405
Twin Tuner DVB-S DVB-S2 LoopThrough
Kein Lüfter(No Fan)
PIP
Demodulator QPSK 8PSK
Frequenzbereich 950MHz ~ 2150MHz Display VF Display
Optional Festplatte (intern)
Fronttasten : Power, Lautstärke +/-,OK,
Sender +/-,Wechseln
Conditional Access
Common Interface 2 x CI slot
CA 2 x interne Kartenleser
Anschlüsse
SCART 1x TV, 1x VCR
Tuner 2x LNB in , 2x Loop Through
HDMI 1x
Composite RCA/Cinch 1x Video,2XAudio Komponent RCA/Cinch 3x
Data 9 Pin D-Sub, RS232C 1x
S/P DIF optisch 1x
Netzwerk Ethernet LAN RJ45 1x
USB 2.0 max. 500mA (Front 1x , Rücks. 2x)
A/V Decoding
Standard CCIR601
Video Resolution 576p 720p 1080i
Audio Dekoder MPEG-1 Layer 1/2 und 3 , AC-3 , MPEG-4 AAC
Video Dekoder MPEG-2 & MPEG-4 H.264/AVC
Stromversorgung
Eingangsspannung AC 90-240V, 50Hz/60Hz
Stromaufnahme max. ~65 Watt, Standby max. 1 Watt
http://digitalt.tv/wp-content/gallery/cache/690__585x133_clarke-tech-et-9000_front.jpg
Produkteigenschaften
Broadcom Mips Prozessor
Open Source Linux E2 Operation System
Media Player
Plugin support (JPEG, MP3, XviD ...)
2 interne Kartenleser
2 CI Slots
MPEG2 / MPEG4 H264 Kompatibel
DVB-S2 Twin Tuner mit Loop Through
VF display 12 Digit DOT Matrix
128 MB NAND Flash / 512 MB DDR Memory
External SATA supported
1 x (3,5” Halterung ) interner SATA HDD Anschluss (Festplatte nicht enthalten)
Netzwerk Ethernet Interrface 10/100MB
3x USB 2.0 Anschluss (1x Front /2x Rückseite)
Fernbedienung 4 in 1 (STB,TV,DVD,AUX)
HDMI
Y Pb Pr Komponent
Composite Video (RGB)
2x Scart
Digital Audio SPDIF (optisch)
EPG
Automatischer&Manueller Suchlauf
Sender wechsel < 1 Sekunde
Multiple LNB control (DiSEqC)
Videotext / Teletext
Unterstützung E2 Bouquet und Senderliste
http://digitalt.tv/wp-content/gallery/cache/689__500x105_clarke-tech-et-9000_back.jpg
http://digitalt.tv/wp-content/gallery/cache/692__556x126_et9000remote.png
Technische Daten
Allgemein
Maße (B X H X T) 380 X 60 X 240 (mm)
Gewicht (Net) ca. 3 kg
Betriebstemperatur 0°C ~ +45°C
Farbe Schwarz
LNB Steuerung
Polarization 14/18V [max. 400 mA]
22KHz Ton
DiSEqC 1.0 / 1.1 / 1.2 / USALS
System
NAND Flash 128MB
DDR Memory 512MB
Prozessor Broadcom MIPS Bcm 7405
Twin Tuner DVB-S DVB-S2 LoopThrough
Kein Lüfter(No Fan)
PIP
Demodulator QPSK 8PSK
Frequenzbereich 950MHz ~ 2150MHz Display VF Display
Optional Festplatte (intern)
Fronttasten : Power, Lautstärke +/-,OK,
Sender +/-,Wechseln
Conditional Access
Common Interface 2 x CI slot
CA 2 x interne Kartenleser
Anschlüsse
SCART 1x TV, 1x VCR
Tuner 2x LNB in , 2x Loop Through
HDMI 1x
Composite RCA/Cinch 1x Video,2XAudio Komponent RCA/Cinch 3x
Data 9 Pin D-Sub, RS232C 1x
S/P DIF optisch 1x
Netzwerk Ethernet LAN RJ45 1x
USB 2.0 max. 500mA (Front 1x , Rücks. 2x)
A/V Decoding
Standard CCIR601
Video Resolution 576p 720p 1080i
Audio Dekoder MPEG-1 Layer 1/2 und 3 , AC-3 , MPEG-4 AAC
Video Dekoder MPEG-2 & MPEG-4 H.264/AVC
Stromversorgung
Eingangsspannung AC 90-240V, 50Hz/60Hz
Stromaufnahme max. ~65 Watt, Standby max. 1 Watt