how to set up a cline and an fline

[piopat]

hi guys after much reading of threads and asking questions, i managed to get my 2 dm500s flashed with nabillosat darkstar 11, i set them up and scanned for channels and installed and started cccam. i got dream control center to talk to the boxes and i opened cccam.config and i edited the boxkey line(i entered my boxkey)and i now can see all channels movies and sports (and the card will work in either box) i would now like to share the card with the second box. i tried to set up an fline on my box and a cline on the other box but no good. this is what i put in to the fline in my box F:joe blog dm5001 {2 1 0} and the cline i put in to the other box C:my box ip 12000 my user my pass yes .can you tell me where i went wrong or is it all wrong , i want to allow my mate view any card i have but not allow him to reshare with some one else. i have as i said been looking at sites for days now and with all the helpfull info i got i have come this far, so i only need help to share my box and i will be very happy. if anyone can help it will be great thanks.

[piopat]

ok an update. in the box i want to share with i pressed yellow button on the remote and scrolled down to nabillo cccam info and pressed ok. i scrolled down to servers and pressed ok, onscreen it says( offline-my box ip-0 cards) any ideas why it says offline and no cards. (having done what i did above)except i scrolled down to shares, the server bos says(on top of the screen)nabilsat cccam info [1 shares], and below that it says /dev/sci0 |sci |963|nds |0 |0 11| | . so am i on the right track, of course something is wrong ,obviously im not there yet, if any one can offer any help regarding my previous post above and a little help explaining what i described in this post be very helpfull thanks.

[piopat]

for newbies an fline and cline can be set very easy, and you can add to your fline later. an example of a very simple fline, F: bedroom1 box1 (bedroom1 is user name ,box1 is the password ,but you can use any user and password you like as long as they match those in the cline), now the cline. if you only share within your own home your cline will start with the ip address of the box you use as the server, example of a cline C:192.168.0.254 12000 bedroom1 box1 (192.168.0.254 is an example of what your server box ip will look like ,12000 is the port that is used most often, and bedroom1 box1 as in the fline). you could use something like F:bedroom1 box1 and C:192.168.0.254 12000 bedroom1 box1 , and F:bedroom2 box2 , C:192.168.0.254 12000 bedroom2 box2 and so on around the house . for sharing with friends or family outside of your home you will need to go to http://www.dyndns.com and open a free account. enter in your details and create a dyndns address. dyndns will be used in the cline instead of an ip address. so say your name is bobby you can have a dyndns name like , bobby.dyndns.ws (all names will be followed by dyndns and you can choose the .ws or what ever you want. you also need to download and install a bit of software called dyndns updater (again just fill the details and the program will work on its own) with out this you cant cs outside your home. so now when you want to share with someone outside your home your cline will look like this C:bobby.dyndns.ws 12000 friend1 box3 and the fline will be friend1 box3 ,i say box 3 beacause i allready assigned you boxs 1 an 2 in your house. you can add to the fline as you go adding restrictions (not needed in your own house)but adviseable outside of the house. i hope this is a help to any newbies.

[newton]

for newbies an fline and cline can be set very easy, and you can add to your fline later. an example of a very simple fline, F: bedroom1 box1 (bedroom1 is user name ,box1 is the password ,but you can use any user and password you like as long as they match those in the cline), now the cline. if you only share within your own home your cline will start with the ip address of the box you use as the server, example of a cline C:192.168.0.254 12000 bedroom1 box1 (192.168.0.254 is an example of what your server box ip will look like ,12000 is the port that is used most often, and bedroom1 box1 as in the fline). you could use something like F:bedroom1 box1 and C:192.168.0.254 12000 bedroom1 box1 , and F:bedroom2 box2 , C:192.168.0.254 12000 bedroom2 box2 and so on around the house . for sharing with friends or family outside of your home you will need to go to http://www.dyndns.com and open a free account. enter in your details and create a dyndns address. dyndns will be used in the cline instead of an ip address. so say your name is bobby you can have a dyndns name like , bobby.dyndns.ws (all names will be followed by dyndns and you can choose the .ws or what ever you want. you also need to download and install a bit of software called dyndns updater (again just fill the details and the program will work on its own) with out this you cant cs outside your home. so now when you want to share with someone outside your home your cline will look like this C:bobby.dyndns.ws 12000 friend1 box3 and the fline will be friend1 box3 ,i say box 3 beacause i allready assigned you boxs 1 an 2 in your house. you can add to the fline as you go adding restrictions (not needed in your own house)but adviseable outside of the house. i hope this is a help to any newbies.

@piopat,
THKS FOR WHAT YOU POSTED HERE IT REALLY HELP ME OUT.
PLZ I WILL LIKE TO NO WHAT DEVICES I WILL NEED TO SETUP CLINE.
I ALREADY HAVE STRONG RECEIVER 4669Z, WHAT WILL NEED TO COMPLETE THE SETUP.
THKS