Smartgo and Cccam dreambox 7000

[tura]

hello.i need help to install smargo on 7000 and nabilo.i install the conax card.this is my cgf:
SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000
CAMKEY: /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/usb/tts/0
whatever i do cccam info says no or unknown card to tts/0
how can i see that 7000 or cccam sees my smargo?plz help :angel:

[firga]

For Nabilo you must have smargo dreiver den smargo work. You have DM 7000 smargo suport/dreiver egsist not. Some say u can use the driver from the 7020.

Downoload smargo dreiver-Nabilo

Smartreadplus_Drivers (http://rapidshare.com/files/257304396/Smartreadplus_Drivers_2_.zip)

Gemini image smargoreader ist suported.

[nelke]

im Bluepanel > Extras/Einstellungen > Kernel Module
> USB Cardreader (Chipset FTDI) auf ..ja ..setzen
auf dem PC das Treiberpaket installieren ,
mit Smartreader Update auf v.1.3 aktualisieren ,

mit Smartreader Config Smargo einstellen auf :


Mode = Autoswitch
Kernel = Dreambox
T-Mode = 0
EGT = 0